Would A Junior Lock Set Fit A Gti

[scott-205gti 2]

Hi does anyone know if a lockset of a peugeot 205 junior would fit a peugeot 205 gti.Thanks

[johnnyboy666 195 1 Cars]

I beleive they are all interchangeable

[Daviewonder 533 3 Cars]

Yes it does except for the glove box. I have a lock set from a base model fitted to my Sorrento GTI. Base models in the scrappy are a great way of getting a lock set for your GTI so all the locks work off the same key.

[johnnyboy666 195 1 Cars]

edit: beaten to it

Edited January 10, 2012 by johnnyboy666

[Anthony 1,003]

Yes - you'll need to swap the petrol cap trim over, and I suspect a Junior model won't have a glovebox lock, but otherwise it'll all swap fine

[Sinbad 16]

Excellent thread! Im glad i seen this "GTI" lock sets on ebay are expensive-now i'll go to the scrappers i think!

[scott-205gti 2]

Hi i also posted a topic about the floor pans on my gti, im hoping to restore her to her former glory over time but am a bit worried about the condition of the floor pans is it possible to remove the damaged section and get someone to weld in some good ones if there is any, any ideas please.Thanks

[johnnyboy666 195 1 Cars]

again, boot floor panels should be interchangeable. From memory its not welded all the way round, mainly spot weld and seam sealer i think

 

as for the rest of the floor, cut out and weld in should be all good. Probably best to make sure you cut it from a 3dr model, not sure if they differ much, depends on which bit of tin you need really

Edited January 10, 2012 by johnnyboy666

[dave205 19]

Hi i also posted a topic about the floor pans on my gti, im hoping to restore her to her former glory over time but am a bit worried about the condition of the floor pans is it possible to remove the damaged section and get someone to weld in some good ones if there is any, any ideas please.Thanks

[/quote

 

Ive got a couple of scrap shells that i could cut you some bits off for beer tokens

Edited January 10, 2012 by dave205

[scott-205gti 2]

Hi that would be great if you could I'm looking for complete front floor pans. As I think someone has jacked the car up from the floor pan resulting in crushing the floor pan it's really hard to explain I posted a picture to try and show the damage it's basically crushed the drain hole area on the floor pan how much would you want for the floor pans and is the area where mine are crushed ok, sorry about the confusing reply.

[scott-205gti 2]

Forgot to ask how much would you want for them with postage. Thanks

[dave205 19]

Whereabouts are you based? Neither cars have engines, subframes, panels etc on/ in them, so im sure between us we could roll them onto there sides and simply chop them out with a grinder. There yours for £20 each as long as ther in ok condition. Pm me if your interested.

[scott-205gti 2]

Hi I'm near Skegness Lincolnshire. Whereabouts are you located. Cheers

[dave205 19]

Herefordshie