Ph2 Rear Bumper Lights

[dirtdog 4]

So..what holds these in place? Had them off my car for so long the clips or whatever they were that once held them in place have now evolved, grown legs and walked away...or i've lost them.

 

I get that the little 'spike' part of the units goes up into a hole in the bumper but I can't seem to find anything in my parts pile that will clamp or clip the bottom of the lamp units into the bumper.

 

Thanks in advance

[pug_ham 244 3 Cars]

There should be a small metal clip that slides over the lower locating tab below the unit but they are very eassily & often lost when removing the light.

 

 

9D 6992 24 01 HOG RING

 

g

[dirtdog 4]

There should be a small metal clip that slides over the lower locating tab below the unit but they are very eassily & often lost when removing the light.

 

 

9D 6992 24 01 HOG RING

 

g

 

CHEERS!

[Obey_R 23]

I drilled a small hole through both tabs and stuck an R clip through, didn't think about buying any clips to be honest but its an easy fix.