Who Has Converted Their 205 To 2.0 8V Turbo?

[pugdamo 111 2 Cars]

If your top mount bolts to the engine with 2 allen key bolts and 2 16mm nuts directly behind them you need is the 306 gti6 or a xsara VTS,thats the type i used on mine

[pugdamo 111 2 Cars]

Found a pic

 

[welshpug 1,657]

that's the 406 one, 605 used the one with the 1.9 MI type bracket, miles uses them as they're a decent bit lighter.

[Ryan_g1 9]

If your needing an mi16 top bracket, I have one I no longer need as I have the 406 mount on mine now. £25 delivered.

 

Also does anyone know the pin data for the vss as my autodata isn't working.

[Slo 283 1 Cars]

Ill have it but let me put a picture up first to confirm 2 tix

 

EDIT: to add picture

 

Edited January 3, 2013 by Slo

[Miles 331 1 Cars]

Top mount as here,

[pugdamo 111 2 Cars]

that's the 406 one, 605 used the one with the 1.9 MI type bracket, miles uses them as they're a decent bit lighter.

 

Mine is a 605 engine,maybe my mount is like that as its one of the later 605's?

[Jemehan 3 1 Cars]

That is one beautiful looking clean and tidy engine bay - ENVY!

[Ryan_g1 9]

Mine is a 605 engine,maybe my mount is like that as its one of the later 605's?

 

Yes mate the mount I have here is the correct one for your engine. Drop me a pm if your wanting it and ill get it posted out ASAP.

[welshpug 1,657]

Mine is a 605 engine,maybe my mount is like that as its one of the later 605's?

 

 

unlikely, there's only the alloy type listed, did you remove it yourself?...

[pugdamo 111 2 Cars]

unlikely, there's only the alloy type listed, did you remove it yourself?...

 

Yeah i bought a complete car,its a P reg SRTI

[Slo 283 1 Cars]

New clutch has come and it doesnt fit ffs its only 205mm the driven plate wont fit on the splines and the pressure plate doesnt line up with the flywheel back at work tomorrow for 6 days AARRRRRGGHHHHHH

[Slo 283 1 Cars]

Rang up to moan about the clutch and the seller admitted someone has balls'd up and sent me a 259 kit instead of a 529 kit (their numbering system), result = sending me the proper one by overnight delivery and i can keep the other one FOC so if anyone is after a brand spanking full astra clutch kit 86-91 ive got one

[Slo 283 1 Cars]

Got the correct clutch now and have hit another snag the torx bolts are too big for the mi16 flywheel, the ones out of my 205 (13mm nuts) are also too big. BUGGER. Are these 12mm nuts/torx equivalent?

[welshpug 1,657]

M7 Allen headed bolts.

 

6913 98.

 

£1.50 each

[Slo 283 1 Cars]

Can i use 11mm bolts with washers and thread lock as they fit

[welshpug 1,657]

if they're clutch bolts yeah, if not I doubt they'll be strong enough.

[Slo 283 1 Cars]

Mmm was just clutching at straws there really oh well another session wasted and so close to bolting the lump in

[welshpug 1,657]

got any other engines lying about with clutches on? same as XU7/10, XUD9T, TU1/3.

[Slo 283 1 Cars]

Only the turbo engines and this 1.9 ive asked speno if hes got any laying about failing have a walk over to peugeot in the morning

 

EDit: Can they be drilled out and retapped or will the threads be s*ite? or is the steel too hard to tap

Edited January 4, 2013 by Slo

[dcc 855]

just buy the right ones. shouldn't re use them anyway.

[Slo 283 1 Cars]

I will do. Just a bit miffed that they changed the bolt size on this mi16 to thinner bolts yet the others are the same, theres a big difference from the 2.0 turbo clutch to the 1.6/9 yet same chunky bolts

 

 

Is it these bolts?

Edited January 5, 2013 by Slo

[welshpug 1,657]

No, they are 30 mm long from tu5 engines, you need shorter.

 

Just get new

[Ryan_g1 9]

I drilled mine out and tapped them without any problems Andy.

[pugdamo 111 2 Cars]

Iv got 2 bolts,can send them up if you wanna pay postage,should save you buying 2 packs.