Engine Mounts For Turbo

[Nbettley 4]

is there a bottom engine mount you can buy to fit the 406 turbo manifold and turbo as it fouls on the bulkhead now, or do you have to fabricate your own one?

 

thanks in advance

[mang 3]

I had to make my own its about 20mm longer give or take dont forget to change the drive shaft housing first.

[Nbettley 4]

okay it it easy enough to cut and shut it? and what needs to be done to the driveshaft housing?

[mang 3]

you need to put the 205 one on not the 406 one the shafts wont line up this is going into a 205 yeah?

[Nbettley 4]

yeah but its still the 1.6 xu just doing a diy turbo on it and just want to get it all bolted it so i can start on all the pipework

 

thanks

[welshpug 1,661]

have a read of tom fenton's project thread, I would imagine no engine tilting was done.