Panels, Please Help

[Dizzee stuff 33 1 Cars]

Just started some restoration on my 205 but have some problems with panels, its seems hadrian panels have just gone bump and i am having problems getting some headlamp mounting repair panels, every place has nil stock ???.

 

I also need the rear bumper mounting panels, does anyone have a patern or some good ones they would be willing to cut from an old body shell.

[welshpug 1,656]

try imperial, I believe they hold large stocks and may be buying Hardians.

 

al;so try peugeot.

[Dizzee stuff 33 1 Cars]

try imperial, I believe they hold large stocks and may be buying Hardians.

 

al;so try peugeot.

 

Do you have a webb address for imperial carnt seam to find them with just a search. Peugeot told me to contact pug parts, the headlamp panels they have are £118.00 + vat sounds a bit steep.

[Dizzee stuff 33 1 Cars]

does anyone no if the 5 door panels are the same as the ones I am after.

[welshpug 1,656]

yup, they'll be the same part number.

[joshsnoad 2]

hey, try carz2.co.uk. they stock loads and have picture of all parts with prices on their website. just had a quick look and each headlight panel is only £12 each

[Dizzee stuff 33 1 Cars]

hey, try carz2.co.uk. they stock loads and have picture of all parts with prices on their website. just had a quick look and each headlight panel is only £12 each

 

spoke to them today, they have them on there site but dont have any instock. seams they must all buy from hadrian.

 

Thanks anyway

[Dizzee stuff 33 1 Cars]

Can anyone help with the rear bumper mounting panels, need a template or could someone cut sum from an old bodyshell.

[Sinbad 16]

its sel-imperial mate

[Liquid_106 97 1 Cars]

http://www.crashrepairparts.com Edited December 6, 2011 by Liquid_106

[Dizzee stuff 33 1 Cars]

Sorted the bumper panels & part of inner wing today, just need headlamp repair panels. Gonna try a wanted post.

[Leet205 48]

you will struggle to get aftermarket pattern headlight panels tbh, i had to go to the scrappy and cut off a section then pick off the parts i wanted.

 

out of intrest what was the inner wing panel? got a part no?

[Dizzee stuff 33 1 Cars]

you will struggle to get aftermarket pattern headlight panels tbh, i had to go to the scrappy and cut off a section then pick off the parts i wanted.

 

out of intrest what was the inner wing panel? got a part no?

 

The piece under the washer bottle

[Baz 421]

Can anyone help with the rear bumper mounting panels, need a template or could someone cut sum from an old bodyshell.

 

I have these too, & the inner wings! If only i'd seen/read this thread before!