Dizzee stuff 33 1 Cars Posted December 6, 2011 Just started some restoration on my 205 but have some problems with panels, its seems hadrian panels have just gone bump and i am having problems getting some headlamp mounting repair panels, every place has nil stock ???. I also need the rear bumper mounting panels, does anyone have a patern or some good ones they would be willing to cut from an old body shell. Share this post Link to post Share on other sites
welshpug 1,646 Posted December 6, 2011 try imperial, I believe they hold large stocks and may be buying Hardians. al;so try peugeot. Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted December 6, 2011 try imperial, I believe they hold large stocks and may be buying Hardians. al;so try peugeot. Do you have a webb address for imperial carnt seam to find them with just a search. Peugeot told me to contact pug parts, the headlamp panels they have are £118.00 + vat sounds a bit steep. Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted December 6, 2011 does anyone no if the 5 door panels are the same as the ones I am after. Share this post Link to post Share on other sites
welshpug 1,646 Posted December 6, 2011 yup, they'll be the same part number. Share this post Link to post Share on other sites
joshsnoad 2 Posted December 6, 2011 hey, try carz2.co.uk. they stock loads and have picture of all parts with prices on their website. just had a quick look and each headlight panel is only £12 each Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted December 6, 2011 hey, try carz2.co.uk. they stock loads and have picture of all parts with prices on their website. just had a quick look and each headlight panel is only £12 each spoke to them today, they have them on there site but dont have any instock. seams they must all buy from hadrian. Thanks anyway Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted December 6, 2011 Can anyone help with the rear bumper mounting panels, need a template or could someone cut sum from an old bodyshell. Share this post Link to post Share on other sites
Sinbad 16 Posted December 6, 2011 its sel-imperial mate Share this post Link to post Share on other sites
Liquid_106 97 1 Cars Posted December 6, 2011 (edited) http://www.crashrepairparts.com Edited December 6, 2011 by Liquid_106 Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted December 7, 2011 Sorted the bumper panels & part of inner wing today, just need headlamp repair panels. Gonna try a wanted post. Share this post Link to post Share on other sites
Leet205 48 Posted December 7, 2011 you will struggle to get aftermarket pattern headlight panels tbh, i had to go to the scrappy and cut off a section then pick off the parts i wanted. out of intrest what was the inner wing panel? got a part no? Share this post Link to post Share on other sites
Dizzee stuff 33 1 Cars Posted December 7, 2011 you will struggle to get aftermarket pattern headlight panels tbh, i had to go to the scrappy and cut off a section then pick off the parts i wanted. out of intrest what was the inner wing panel? got a part no? The piece under the washer bottle Share this post Link to post Share on other sites
Baz 421 Posted December 8, 2011 Can anyone help with the rear bumper mounting panels, need a template or could someone cut sum from an old bodyshell. I have these too, & the inner wings! If only i'd seen/read this thread before! Share this post Link to post Share on other sites