Best Place To Buy Bottom End Bits?

[Josh_Quant 27]

Was just wondering if anyone knew best place to buy bottom end bits for 2.0 MI16 with HDI crank

 

 

I need....

 

1.) Crank seals both sides

 

2.) big end bearings

 

3.) Main bearings (will I need HDI ones or Mi16) ??

 

4.) thrust washers

 

5.) piston rings

 

 

cheers Josh

[Josh_Quant 27]

http://www.shop.pug1off.com/index.php/cPath/29_52

 

 

Does anyone know why 405 2.0 MI16 bearings are different prices to 306 S16?? even know there the same?

[Miles 331 1 Cars]

Lack of product knowledge?

[welshpug 1,657]

you need to shop around, don't discount the main dealers though, you'll be surprised what comes out at reasonable prices (J4R big ends, £25 a set!)

[Josh_Quant 27]

Yeah I always look on service box great site!

 

 

Peugeot Crankshaft seals cheaper then euro car parts £31.19

 

But big end bearings on there??

 

 

When they list the bearings as 2 why does it say set 8 1/2 brng then the part numbers 0606 k2 and 0606 L2 i think is standard size and oversize?? or is it top and bottom bearings??

[Miles 331 1 Cars]

Crank seals, I only use Payen now, Even the Pug ones I don;t find very good

[welshpug 1,657]

yeah that's a full set of bearings, one will have CR and one CN next to it, CR is the + 0.3mm oversize set.

 

I used 606N6, £25

[Josh_Quant 27]

Cheers Welshpug i finally know

 

606N6 gti6??

 

0606 K2 £35.22 bargin

[welshpug 1,657]

naah, XU10J4R

[Josh_Quant 27]

welshpug still got your old Mi bottom end?

 

 

mines 4 thou oversize made me feel like crying today when i was showed

and i painted it too :L

 

 

trying to get some oversize pistons if not another block

Would love to buy these puppies but skint xmas

http://www.ebay.co.uk/itm/WOSSNER-HI-COMP-FORGED-PISTONS-PEUGEOT-405-MI16-2-0-/130477120793?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e610add19

[kyepan 291]

you can get a whole bottom end gasket set (including both crank seals) for probably around what you just quoted for the seals alone.

 

check about for the gasket sets.

[Josh_Quant 27]

Dont list 2.0 mi16 only gti6 and 1.9 mi16 £55.25

 

http://www.shop.pug1off.com/product_info.php/cPath/29_53/products_id/619

[welshpug 1,657]

yeah I do actually, only recently took the head off to make it easier to move around

 

got a gti6 block two gti6 heads and XU10J4R and XU7J4 head, and an XU9JA head and XU5 and an XU7 block

[Josh_Quant 27]

thats good

 

for sale maybe?? if i cant get oversize pistons

 

 

gti6 block simiar??

 

 

 

[welshpug 1,657]

pretty much identical, they will all need a rebore though, they don't wear well so just stick with what you have.

 

that's a funny XU10 gasket set, there's liner seals shown

 

 

 

0197 G7

 

ENGIN GASKT KIT

- INJECTION XU10J4

- TURBO INJECTION XU10J4TE

 

marked as NFP but you may still find stock.

[Josh_Quant 27]

so similar block, different rods and pistons, same crank stroke i think?

 

well hopefully i can get overisze pistons then i think 20 thou overize i think he said lol

or was it 10

 

Have you seen the price from peugeot??

[welshpug 1,657]

exactly the same crank.

 

haven't bothered asking about oversize pistons, if you wanted to spend that much I'd be speaking to an engine builder for some higher compression pistons

[Miles 331 1 Cars]

That's another bad listing, The Iron Block GTi6 engine does not use a sump gasket, End Casing gasket.

 

Just 2 crank seals, Water pump gasket but you get one with a Water pump anyway and a sump washer for 55.00 is a rip off

[Josh_Quant 27]

yeah but there 500 plus notes

[Josh_Quant 27]

when you put it like that yeah!

 

well if a gti6 uses instant gasket may aswell use it on my mi16 then

if i get to that stage

 

 

[Miles 331 1 Cars]

Again only use a OE Sump gasket, About £10.00 from Pug, these seal unlike all Pattern one's, But the rule is only a sump gasket is you have a tin sump, Anything alloy is just Sealent

[Josh_Quant 27]

Cant get standard overisize pistons

 

is a xu10j4r bottom end any good?

im guess its a detuned version of gti6?

 

 

 

[Baz 421]

IIRC just doesn't have piston oil spray bars, otherwise the same as other xu10 blocks.

[welshpug 1,657]

some do some don't Baz

[Josh_Quant 27]

whats does IIRC stand for

 

can you get oversize pistons for gti6??