Front Bumper , Brackets, Sliders Etc Diy ?

[djinuk 2]

Ok , in the middle on my 205 restoration (gone on for years now). And my front bumper sliders etc were all rotton.

 

Ive done a little bit of research and it appears the base models used a diffrent simplier design to the gti's , where as the gtis have a slider with some form of a rubber and all kinds of magic, the problem is every 205 ive took apart also has what appears to be brackets removed from the titanic (after it sunk) , does this mean its peugeot only, or have people came up with a cheap and basic diy job?

[djinuk 2]

it also looks like a part of the kit is no longer avalible so i couldnt buy it if i wanted.

 

http://www.ebay.co.uk/itm/Peugeot-205-GTi-Front-Bumper-Fixing-Kit-NEW-GENUINE-/330644988020?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4cfbfa2074

[darrellspeed 1]

i found this as well, ended up using a rear bumper kit from ebay, but added a couple large washers, and removed the sliders completely, just make sure its in the right place before you tighten it up.

[cRaig 273 1 Cars]

it also looks like a part of the kit is no longer avalible so i couldnt buy it if i wanted.

 

http://www.ebay.co.uk/itm/Peugeot-205-GTi-Front-Bumper-Fixing-Kit-NEW-GENUINE-/330644988020?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4cfbfa2074

 

If you look a few threads down in the body section, you will see that I have posted regarding the the front bumper fixing kit and Tom Fenton is discussing making the non available part, see this thread for updates.