Gearbox Bolt Layout

[cRaig 273 1 Cars]

Hey There,

 

I hope to get my engine and gearbox mated together again soon, but annoyingly the bolts have got mixed in with my box of re-plated nuts and bolts. Could anyone describe the layout/heads and lengths for the gearbox bolts. Its for a BE3 1.9 if that makes any difference If I remember correctly there were different lengths on different sides of the box.

 

(a description of the starter motor bolts may help as well!)

 

Thanks in advance!

 

Craig

Edited November 26, 2011 by cRaig

[Fox 3]

Having refitted a box today, I'd also like to know! Are yours a mix of normal and Allen key ones?

[cRaig 273 1 Cars]

Ive got a box with all the engine bay & gearlinkage bolts all mixed together, after being yellow zinc plated. So its difficult to pick any of them out at the moment! From memory I believe they are a mix of allen key and normal bolts

[damien 22 1 Cars]

is this anygood?

 

[welshpug 1,657]

swapped a box on my XU10J4RS lump last week, 16mm hex head at the top pair and lower front, 8mm allen bolt for the three starter and lower rear bolt.

[cRaig 273 1 Cars]

Thanks chaps