Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
erbs

Oil Pump Question

Recommended Posts

erbs

on my 1.9 i plan to take the sump off and clean the sump and oil pump.

 

does the oil pump have a o ring or seal where its bolted to the engine?

 

also are they easy to remove from the chain driving the pump?

Edited by erbs

Share this post


Link to post
Share on other sites
welshpug

no seal, just a metal to metal joint, pretty easy to wiggle out from the chain, there's an L shaped thin steel spacer between the pump and the block, slid this out and it'll be a little easier.

Share this post


Link to post
Share on other sites
pug_ham
there's an L shaped thin steel spacer between the pump and the block

Not always, these were (apparently) removed & the pump height increased from early 1987 but I've seen a decent mix of later engine s both with & without the spacer so if its not there don't be overly concerned.

 

g

Share this post


Link to post
Share on other sites
Sign in to follow this  

×