Wobble Bolts

[dave205 19]

Not sure if this is the right place for this thread but anyway!

 

Curious to know if you could fit 4x108 wheels to 4x100 with wobble bolts, providing the centers fitted or i got some spigot rings?

If so anyone recommend where to buy some?

[welshpug 1,657]

108 to 100 is too far for a wobble bolt, 100 to 98 is the typical application they'd be used on.

 

 

typically a 100 pcd wheel would require a spacer to correct the offset for a pug so some 100 to 108 adapters can be used.

[Ryan 99]

Wobble bolts will also invalidate your insurance in 99% of cases.

[welshpug 1,657]

err, why?

[Henry Yorke 269 3 Cars]

I ran them on my Alfa 155 as it ran 4x100 wheels on a 4x98 hub. There is only 1mm of movement in them.

 

Also the chances of a 4x100 wheel being the right offset is pretty low too so you would need spacers, which means you may as well fit drilled adapters.

 

I know a guy that ran Volvo T5 16" wheels on his 205 as he had redrilled the hubs as the PCD was correct for at least one of the holes

[dave205 19]

Looks like i'll need to invest in some hub adaptors, anyone recommend where to buy some?!

[Henry Yorke 269 3 Cars]

http://www.ebay.co.uk/itm/4x4-5-114-3-4x108-4x100-Wheel-2-Rim-Adapters-1-25-/160493245907?pt=Motors_Car_Truck_Parts_Accessories&hash=item255e2495d3

Not a bad price actually when compared to spacers and stud conversions etc

[dave205 19]

They look the sort of thing but there for fitting 4x100 wheels to a 4x108 or 4x114.3 hub, unless im missing something?

[dave205 19]

err, why?

 

So i can run pug/ford fitment wheeld on anything vauxhall/vw etc.

[welshpug 1,657]

So i can run pug/ford fitment wheeld on anything vauxhall/vw etc.

 

 

wasn't asking you, I was questioning Ryan's post

[dave205 19]

think i might just give up on this idea!!