Mi16 Cams Help!

[Josh_Quant 27]

Hi fella's need your help like normal

 

 

Iv got a 1.9 mi16 catcams inlet cam and wanted to fit it to 2.0 mi16 but came aross bit of a problem i think that they not changable!

 

 

my 2.0 cam has got a lobe for the camshaft sensor and a slot to run the vaccum pump on the oppsite end of the cam and the 1.9 is just plain.

 

here a few pics of it hope you can see it ok.

 

[Josh_Quant 27]

 

[petert 588]

You may find this useful:

 

http://forum.405mi16.com/index.php?showtopic=2434&pid=18141&st=0entry18141

[Josh_Quant 27]

cheers mate!

 

I will be looking for someone with a milling machine now

[Josh_Quant 27]

would you be interested in doing this for me peter t?

[welshpug 1,661]

which ecu are you using? as you're going 2148cc I guess not the standard one, if so then just leave that off.

Edited January 29, 2012 by welshpug

[Josh_Quant 27]

on standard with superchip limiter (6900), uprated fuel pressure regulator, gti6 inlet manifold

 

why not the standard one? i cant afford £1500 to buy ITB and wont be running twin carbs becuase i want to get more than 20 MPG

 

I know it wont be using the bottom end to it full potential

 

so i need it to run cam sensor and my vaccum pump

Edited January 29, 2012 by Josh_Quant

[welshpug 1,661]

oh dear, that's just a big failboat waiting to set sail

[Miles 331 1 Cars]

You need to have a think about this, GTi6 injectors don;t run on a std ECU, the S16 ones will be wrong for the engine size and power, Even on a std engine the 6 manifold confuses the S16 ECU

If you cannot afford the rest then I'd leave it for a while

[Josh_Quant 27]

will be running s16 fuel rail and injectors. and i havnt got a standard bottom end mine was worn

 

iv been driving well over a year with gti6 inlet manifold been running fine had no problems??

 

I really appriate your opinion

 

couldnt i run slightly bigger injectors still? for the extra cc

 

thanks Josh

[welshpug 1,661]

you can't just stick larger injectors in as the ecu doesn't know that you have done so.

[Mattsav 1]

You'll have to grind through the hardened layer before you youve got any chance of milling the Catcams inlet. They are STeel billets as opposed to the std chill cast cams.