Small ? Shaped House That Goes Into Sad

[205_sunderland 4]

Do people get new ones, or are there aftermarket replacements available or another solution as ive just got a huge hose looped around for now.

 

Mine decided to burst whilst i was flat out in 4th the other night

[welshpug 1,666]

the coolant hose? yeah just buy a new one...

[Anthony 1,003]

Do you actually mean the SAD hose, or are you talking about the small L shaped coolant hose that goes from the thermostat housing into the coolant block that is located above the SAD on the earlier pre-Phase 2 cars?

 

That particular coolant hose is notorious for failing, but isn't available new from Peugeot any longer to the best of my knowledge. Fitting a used one is a false economy in my opinion, as they're all 20 odd years old now unless they've been replaced previously and likely to fail in the not too distant future.

 

I believe BakerBM sell that hose separately, although I think that you'll have to ask as the individual hoses aren't listed on the website.

[Baz 421]

Or fit a later thermostat housing and use the associated one-piece hose.

[205_sunderland 4]

Do you actually mean the SAD hose, or are you talking about the small L shaped coolant hose that goes from the thermostat housing into the coolant block that is located above the SAD on the earlier pre-Phase 2 cars?

 

That particular coolant hose is notorious for failing, but isn't available new from Peugeot any longer to the best of my knowledge. Fitting a used one is a false economy in my opinion, as they're all 20 odd years old now unless they've been replaced previously and likely to fail in the not too distant future.

 

I believe BakerBM sell that hose separately, although I think that you'll have to ask as the individual hoses aren't listed on the website.

 

 

Its the water hose, that runs near it. Ill try baker this week thanks, im just hoping engine is ok as i cant imagine it bursting at over 100 mph did it any good

[welshpug 1,666]

not a big job but you will need the longer phase 2 hose which costs more, also there wont be anywhere to put your ecu temperature sender as phase 2 thermostat housings have an extra hole for it.

 

Stew does do that hose separately for about £15 iirc.

[205_sunderland 4]

not a big job but you will need the longer phase 2 hose which costs more, also there wont be anywhere to put your ecu temperature sender as phase 2 thermostat housings have an extra hole for it.

 

Stew does do that hose separately for about £15 iirc.

 

18 quid rang him today

[205_sunderland 4]

18 quid rang him today

 

cheers for the help lads