Seam Welding A 205 Subframe?

[fatony1 17]

Is this something worth doing while my subframe is off the car?

 

Thanks in advance.

[SurGie 54]

Absolutely, stitch welding it is more than enough, you dont want to too stiff by seal welding the whole of it.

[EdCherry 34 1 Cars]

More to the point you don't want to warp the whole thing to buggery.

[SurGie 54]

Thats right, try welding it bit by bit and let it cool down a bit before welding another section, so there wont be too much heat put into it.

[BusEngineer 7]

At some point in the past ive seen a picture on here with the areas to stitch weld up paintshopped onto it, not a clue where though! sorry

[Baz 421]

A bit OTT IMO for anything other than an off-road/rallycross car etc.

 

But yes, stitch weld it if anything, inch on, 2 off...

[bensonmi 4 2 Cars]

some one is selling an ex works group a subframe on ebay, any boby know what the difference is or is it just seem welded?

[Cameron 16]

Link? I could do with a laugh.

[Baz 421]

Haha! Me too...

[welshpug 1,646]

can't find it

 

bet its bent...

[fatony1 17]

Is this about right?

 

[Baz 421]

Yup. that looks like it's been done well.

[SurGie 54]

A good job yes, however i would have not welded as many stitches, say 4 instead of the 7 thats on the long part of it.

[fatony1 17]

Good stuff, ill print that off and show it to my welder mate

[welshpug 1,646]

that pic is from KRS

[fatony1 17]

Who's KRS?

[welshpug 1,646]

Kowal rallye sport, a french rally prep company, they do some nice rally bits for french cars.