What The Hell Is Wrong With This?

[pugpete1108 62 1 Cars]

im trying to sort out the pas on my 205 '6 engine. firstly i bought a 205 setup complete, then found out the pump wouldnt fit on the xu10 mount (well so i thought).

 

Damien then sorted me out a 306 one from his rallye, which apart from the return fluid tube and the size of the pulley is exactly the same as the 205 one i have????

 

i cant for the life of me figure out how it bolts on the mount?? it just looks like it wont fit properly?? maybe im missing a bracket or something or just my marbles trying to figure it out.

 

anyways a picture speaks a million word so check this out, the body of the pump is touching the mount so will not go in far enough to line up with the bolt holes:

 

 

[pugpete1108 62 1 Cars]

am i right in thinking it only mounts with the top two holes? and the odd one on the pulley side further down the pump?

[welshpug 1,666]

that looks correct, there's another bolt lower down directly from the top outer one near the pulley, the front hole is only used for a bracket to hold the pipe

[damien 22 1 Cars]

is this any good?

 

 

Edited October 16, 2011 by damien

[pugpete1108 62 1 Cars]

Crystal clear now fellas, cheers.

 

Just need some tensioners and a belt now