Xud9 Conversion Now Won't Start..

[Strictly_Derv 34]

Tried starting it and nothing happens glow plug light comes on, on 1st and sectond ignition which isnt right and then other times nothing happens atal and the battery light stays on when the keys are out. I have no idea whats wrong.

No click from the starter motor either

I check the glow plugs with ign on full and there's a 12.2 v reading, starter motor and alternator show this aswell....

 

So frustrating!

[dcc 855]

did you attach the feed to the solenoid on the starter.

[Choppered 0]

Dodgy earth to the engine maybe?? I know its not a peugeot but had it happen on a rover i was driving once and took the leys out and ignition lights stayed on and alarm starting going off so maybe it could be an earth problem

[welshpug 1,666]

did you use the original wiring loom and did it work fine before you took the engine out?

[Paul_13 212 1 Cars]

did you attach the feed to the solenoid on the starter.

 

Would be my guess.

 

Any immobiliser on the car?

Shunt box connected?

Battery/chassis/gearbox earth connected?

Battery fully charged?

[welshpug 1,666]

wont be the stop solenoid on the starter, it'd be turning over as soon as the ignition was on