Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Will Eastman

Gearbox Swap But No Release Fork

Recommended Posts

Will Eastman

As title im swapping my 1.6 gti be3 gearbox for a reckon one, but the reckon one doesnt have a release fork, what will this mean for when i come to fit to my car, can i just take the old one off my current gearbox? And would i need news bushes? Also any other little bits that will need to be replaced, just want to be able to do the job in a oner.

 

Thanks

Share this post


Link to post
Share on other sites
rallyeash

just swap the fork assy over. i'd put new bushes in it for a smoother, slicker change

Share this post


Link to post
Share on other sites
Anthony

Be warned that getting the fork and clutch arm apart can be a challenge as the pin will likely be seized solid.

Share this post


Link to post
Share on other sites
Will Eastman

Anyone got the part numbers of these bushes? Thanks

Share this post


Link to post
Share on other sites
Anthony

There's a thread that's been active in the past few days with the part numbers listed if you do a search - started by Philfingers IIRC

Share this post


Link to post
Share on other sites
chipstick

I've got some spare bushes if you need a pair of yellow ones.

Share this post


Link to post
Share on other sites
Baz

As Ant says you may need a new pin to secure the arm to the fork, not available seperately, but you buy a 306 one for a few quid that does the job just as well, and it's removable, easy! :)

Edited by Baz

Share this post


Link to post
Share on other sites
chipstick

'205' pins are still available from Peugeot. You may have to buy a bag of 2 though.

Share this post


Link to post
Share on other sites
Will Eastman

Hey sorry to bring this up again but almost at the point of doing the gearbox change. Want it to be a quick in out job, does anyone know if peugeot dealers will stock these bushes or should I just buy a pair of each (yellow,white) so im not waiting around?

Share this post


Link to post
Share on other sites
welshpug

you just need to check which you have fitted already, i.e yellow or white, as for stock levels, you'll have to ask them to find out.

Share this post


Link to post
Share on other sites
cheesegrater

Hey sorry to bring this up again but almost at the point of doing the gearbox change. Want it to be a quick in out job, does anyone know if peugeot dealers will stock these bushes or should I just buy a pair of each (yellow,white) so im not waiting around?

My local had them on the shelf.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×