205 Gti6 Accelerator Choices

[chipstick 382 1 Cars]

Naturally I though the 306 accelerator cable would be a good choice to use for the conversion. It seems I didn't allow for such a difference to the bulkhead hole sizes

 

 

The bottom one is the 205 cable, which I thought I could just swap over onto the 306 cable. The white clip has the cable pressed into it, and when trying to lift it out it needs to come straight out, which seems impossible without breaking one or both trying

 

A generic Peugeot cable from GSF/ECP sounds like the way to go. Any Peugeot's in particular that people have got a cable from that is a straight forward swap over job?

 

405 is bound to be long enough, but I worry I will have the same bulkhead attachment problem.

 

Experiences and trail and error feedback appreciated

[Paul_13 212 1 Cars]

I bought a kit from GSF generic one as you say.

Sorry havent replied to your pm yet, will do in a min

[matty_gti 20]

I bought one of the eBay Peugeot universal ones, it's really stiff though so will need to think of something else!.

[welshpug 1,661]

the cable kits come with a few different ends and fittings, if all else fails just use your old end fittings on the new cable.

[HERMAN 33]

I got one of a 406 petrol fits a treat.

Neil

 

 

 

[Alastairh 47]

I bought one of the eBay Peugeot universal ones, it's really stiff though so will need to think of something else!.

 

Squirt of WD40

[Masekwm 2]

I'm still using a 205 one, it's on the list of things to do but works fine

[stuart1298 6]

i got mine from ecp, its a make it ya self kit, it fits almost anything, only about 20 quid,

[chipstick 382 1 Cars]

The GSF site is rubbish

 

I searched for throttle, accelerator and it was returning nothing.

 

I found a product code on here from WP (N71202) which I used on there and it wasn't recognised.

 

Does anyone have an invoice with a product code that I can order?

 

Or even a ECP number for a universal Peugeot cable

[welshpug 1,661]

GSF re-structured their part numbers 2 years ago, you'll need to phone them.

[stuart1298 6]

Ecp part number 647545001 £19.75 plus vat almost every branch has them on the the shelf

[Josh_Quant 27]

when i done my mi16 conversion i got mine from ALS comes as a kit and you can do it to your own length and choose your ends.