Header Blockage Bung

[chipstick 382 1 Cars]

I am about to fit my Baker BM hoses, and I am using the Ph1 header tank. After realising I don't have enough hoses for all the expansion tank outlets, I have had a search and realise I need to block the 3rd outlet off.

 

The easiest way to get around this would be to use a ph2 tank?, but I want the quicker option of blocking it off. I see someone mentioned a ZX airbox bung Is this the best route? Do Citroen sell them new? A part number would be appreciated if anyone uses Citroen's version of servicebox.

 

As it is going to be under some pressure I want to use something fairly substantional that doesn't fly off and leave me at the side of the road!

 

Edited September 15, 2011 by chipstick

[welshpug 1,661]

phase 2 black header tank has the same number of ports, so fitting that wont help, the level sensor works differently anyway so you can't use it.

 

what size is the port you need blocking?

[damien 22 1 Cars]

big bolt with a jubilee clip

[Stu 18]

I used the bit you have to chop off the heater hose and a dump valve bung i had knocking around

Edited September 15, 2011 by Stu

[marksorrento205 80]

Post up what size you need. I have a list here of a selection of differnt size pug blanks

[Redtop 14 2 Cars]

A bit of pipe and one of these, http://www.viperperformance.co.uk/productsearch.php?xscId=9039&mat=118&filter=12.70 mm or go down to local radiator place and get a rubber blanking plug.

[chipstick 382 1 Cars]

Some good options!

 

Post up what size you need. I have a list here of a selection of differnt size pug blanks

 

The metal end is 15mm

 

And the lower plastic bit is 17-18mm

[marksorrento205 80]

Both these are female blanks to blank off a male outlet

 

14mm 131984

17mm 135504

 

(pug part no's )

[chipstick 382 1 Cars]

That is bloomin fantastic! Thanks for that

[welshpug 1,661]

131984 isnt a bung, its a clip

 

135510 is a bung though, £2.53.

 

135504 is £2.20.

[chipstick 382 1 Cars]

I am going to go for the 135504 17mm varient and cut off the narrower metal end if needed.

 

Will see how it goes and report back.

[marksorrento205 80]

131984 isnt a bung, its a clip

 

135510 is a bung though, £2.53.

 

135504 is £2.20.

 

Correct welshy. My mistake!! I read the part no from the line below on my list