2.0 Turbo'd 205 /406 Loom

[stuart1298 6]

Right, got the car running still a fee problems I'm working through, but I was wondering if it's possible to wire in the OBD part of the loom? I'm sure it could be done with a lot of time, effort and trying to make sense of wiring diagrams, has anyone else attempted this and got it working. , or am I better off smashing my head against a brick wall now to save my self the time and bother

[rory1 1]

Right, got the car running still a fee problems I'm working through, but I was wondering if it's possible to wire in the OBD part of the loom? I'm sure it could be done with a lot of time, effort and trying to make sense of wiring diagrams, has anyone else attempted this and got it working. , or am I better off smashing my head against a brick wall now to save my self the time and bother

Hi

 

I wired this up on my turbo conversion, it's not too hard to do. I've got it written down somewhere so I will look it out and post tomorrow when I've got the piece of paper!!

 

Paul

[stuart1298 6]

I've had a little look at the standard wiring, so assume I could wire it to the original circuit and it should work, I have a hand held reader so was thinking if I connect that as I wire it in. In theory it should power up as I connect the wires. Gonna give it a go tomorrow, as should help me iron out the problems I'm facing mainly the boot issue.

 

With as much info as you can give would help me a lot, cheers mate