[Project] Cti Turbo16

[un numero d'or 38 3 Cars]

There you go, good thing that somebody was taking care of the footage while i was doing all the hard work:)

 

 

Plus some pictures of the rims after many hours of hard work

 

New chrome layer

Edited September 19, 2011 by un numero d'or

[Brian M 0]

Looks like this is going to be a stunning project

[Henry Yorke 269 3 Cars]

I have seen a pic of the spacers going on, but not one of the wheels on the car. I need to see what they look like as you have seriously got me thinking...

 

Have you the full specs of the spacers you had made too? They look deeper than 12mm and I assume the holes are threaded and can take a bolt / stud and you don't need to modify the hubs?

 

I also showed my wife the pics of your girlfriend/wife cleaning your CTI and said "if you really loved me you'd do the same for me." I got a cold stare back from her!! :'(

[un numero d'or 38 3 Cars]

The spacers are 17mm and just to get you thinking even more.......

 

[un numero d'or 38 3 Cars]

Some new pics from a youngtimer meeting down in Krakow last week.

 

Edited October 12, 2011 by un numero d'or

[Henry Yorke 269 3 Cars]

looks great. I almpst got one of those bonnet bras too!

 

Now I know where all the Gutmann wheels have gone to...

[un numero d'or 38 3 Cars]

I bought myself a set of Compomotives and finally refurbished my SL434's. Changed the headlights, made a real bargain on original Valeo's, plus the windscreen viper and light swithes broke down so I had to change those to.

 

[stufarri 98 3 Cars]

Those BBS rims look superb - a very nice CTI, well done mate.

[un numero d'or 38 3 Cars]

Thanx! Glad you like it!

 

 

Those BBS rims look superb - a very nice CTI, well done mate.

[un numero d'or 38 3 Cars]

Time for a suspension upgrade which will take place after the winter. The car is tucked away in the garage for the winter.

 

[feb 47]

Your car is better than porn!

Do you want to sell me the SL434's now that you have the Gutmann wheels?

Where did you get a bargain on the headlights, I am interested in a LHD set.

Edited November 11, 2011 by feb

[un numero d'or 38 3 Cars]

I got them from a guy from the polish 205 forum. Really satisfied with the BBS rims but the SL434's are a must to have so i have to keep them:)

[un numero d'or 38 3 Cars]

Ok no updates for a while now but some steps have been made to complete this project. A buddy of mine was butchering one of his GTI's and i got a complete front suspension which was dismantled sandblasted and later on powdercoated. Whisbones refurbished in Poland where i also bought new parts for the suspension including new bearings. Found a nice set of Brambo's from a Clio III RS and a bigger MC, will probably be running these with 288mm discs.

 

[un numero d'or 38 3 Cars]

Got all new parts for the front suspension and new rear clusters for the Cti. Full set of lights for my other humble project 205 Griffe but more on that one later on. Car delivered to Prowork near Wroclaw for engine swap etc.

Edited August 5, 2012 by un numero d'or

[un numero d'or 38 3 Cars]

Some progress and it looks as if we have a sound engine wich makes everything so much easier.

 

[lewis205cti 12]

Looks amazing. Are you going to be using the Dimma splitrim alloys when the new engine is fitted? Or keeping the bbs? Both are nice wheels

[un numero d'or 38 3 Cars]

The Dimmas are far to wide i'm afraid so will be keeping those for a hopefully future Dimma project. Just to give you an idea of what i mean a couple of pictures of my Griffe. These are both front rims.

 

 

[un numero d'or 38 3 Cars]

New turbocharger GT2860rs

 

[lewis205cti 12]

They do look a tad to wide. haha. Fingers crossed for your future Dimma project. If you ever want to sell them. drop me a PM as i'll be after a set soon as restoring my own dimma. but it's missing the split rims.

[un numero d'or 38 3 Cars]

Part hunting has been the a pain in the a.., but I managed to get a hold of original pistonrings and big end journals which of course are NFP, mains are still available from Peugeot.

 

[Para 82 2 Cars]

Awesome goodiessss :wub:

[un numero d'or 38 3 Cars]

Preparation before stripping

 

 

Stripping time

 

Head work finished

 

Front brakes

 

preparation work

Edited October 6, 2012 by un numero d'or

[un numero d'or 38 3 Cars]

 

some progress being made

Edited October 6, 2012 by un numero d'or

[un numero d'or 38 3 Cars]

gearbox

 

 

[cybernck 402 1 Cars]

Wow, simply amazing.

 

You seem to have taken off from where Magic has left it .

 

Looking forward to new updates.