craig_007 1 Posted August 31, 2011 This might well be a stupid question but I'm in the process of fitting seats into my car.(led to believe there from a 205) I've got the front of the seat runners mounted to the chassis, I've got the runner bolted down next to the handbrake but I have no idea how I'm meant to secure the runner at the other side ! (back right) Is there some kind of bracket that should fit here to take the runner. Share this post Link to post Share on other sites
james_pug 26 1 Cars Posted August 31, 2011 (edited) Yeah there should be a L sort of shaped bracket. Edited August 31, 2011 by james_pug Share this post Link to post Share on other sites
craig_007 1 Posted August 31, 2011 That explains that then. I assume I will now need to make something up to suit. Cheers Share this post Link to post Share on other sites
smithy 1 Posted August 31, 2011 as above there is an L shaped bracket with a captive nut in it. if you dont have them i think i have some spare in the garage so let me know and i will have a look for you,can have them for cost of postage if i do have some. Share this post Link to post Share on other sites
james_pug 26 1 Cars Posted August 31, 2011 I'll also have some spare if smithy doesn't. Share this post Link to post Share on other sites
craig_007 1 Posted August 31, 2011 I would definately be interested in 2 brackets if you have them. Much appreciated. Share this post Link to post Share on other sites