Wiring 306 Gti6 Into 205 Phase 1

[richardjw 1]

Hi guys,

Ive read the threads on the wiring of teh 306 GTi 6 engine into the 205.

All of tehm mention the two brown plugs on the old ECU loom.

I have a phase 1, the only wiring left from the old ECU is a two pin into the can loom, the remainder is ECU loom.

I have some other 'spare wires' in teh chassis loom, near the header tank, i'm guessing these are the sensor wires?

 

Has anyone done this swap into a phase 1, and coul shed some light on the wiring?

 

Cheers guys!

[Miles 331 1 Cars]

It's the easiest car to wire up, you only need to connect the power, Fuel and rev counter feeds in the 6 loom and use all the 205 sensor's