More Turbo Questions...

[stuart1298 6]

Right, had the thing running, had a little spin in my car back, its like s**t of a shovel, but i still cant work out where a few things go, the list

 

the ecu has a little pipe and a valve then more pipe...

 

the wastegate on the back of the turbo...

 

there are 2 small pipes on the intake manifold i no one goes to the feul valve...

 

there a 2 small and 1 large pipes above the inlet pipe on the throttle housing, i no the bigger one (middle) is for the idle control valve, nut not sure about the smaller ones (i think one is for the oil feed thing)...

 

the vac pipe that comes off of the dump valve...

 

i no there are a few pipes that were connected to the old intercooler/air intake hoses, but they went in the bin a long time ago

 

some one did help me, but a few more questions and wasnt to sure where the above bits go, i no this is all school boy errors as i should have taken not of where stuff goes

[Daviewonder 533 3 Cars]

What's wrong with the diagrams I gave you on your last thread?

[stuart1298 6]

you said about the map sensor, cant even find it, is that the bit that goes to the ECU

and where does the vac pipe from the dump valve go? is that the bit to the intake manifold

any idea how i make a cinnection to the inter cooler pipes for the boost controller etc

[Daviewonder 533 3 Cars]

Yes map sensor is in the ecu.

 

The vac pipe for the dump valve is on the inlet as shown in the diagram I drew.

 

You can buy connections on eBay that go through a drilled hole in the boost pipe. Or you can drill down the middle of a bolt and use this.

[stuart1298 6]

Yes map sensor is in the ecu.

 

The vac pipe for the dump valve is on the inlet as shown in the diagram I drew.

 

You can buy connections on eBay that go through a drilled hole in the boost pipe. Or you can drill down the middle of a bolt and use this.

 

brilliant, that makes sense now,

i had the diagrams in front of me with the car and was scratching my head for ages!

cant find the connectors on ebay tho

[stuart1298 6]

where do i take the boost gauge from?

[Daviewonder 533 3 Cars]

This is the kind of thing you need. This ones been sold and there's no more on there at the moment. You could make your own as said above by drilling a hole down the centre of a bolt.

 

My link

 

I'm not 100% but I think you can run the boost gauge from a T piece in the dump valve vacuum pipe.