Adjusting Carb Idle Speed

[Obey_R 23]

Now everything is running fairly smoothly I'd like to bring the idle speed down on my carbs. When warm they currently sit between 1400-1600rpm, and when cold about 800-1000. This was fine when I didn't have a choke cable, but now I've fitted one I can afford to let the idle drop slightly, knowing they'll still run when cold.

 

So the question is, knowing the carbs are all balanced properly, can I just adjust each idle screw by the same amount to get the desired idle speed, or is it more complicated than that?

[Anthony 1,003]

Just adjust the throttle stop on the linkage.

 

Surprised that it's idling so fast for you though, as it's was around 900-1000rpm on mine when warm and 500-600rpm cold.