dee205 3 Posted August 21, 2011 Can anyone tell me if my pas setup looks ok from the pics below. The pump is held by two bolts. One to pivot on and one to fix the pump when tension is on the belt. The pas pulley and cam pulley are less than an inch apart which concerns me too. Share this post Link to post Share on other sites
Paul_13 212 1 Cars Posted August 21, 2011 Thats very similar to a 1.8 dieseasel setup with power steering Share this post Link to post Share on other sites
dee205 3 Posted August 21, 2011 (edited) It started out that way. Rack is from a 95 diesel Mardi Gras. Edited August 21, 2011 by dee205 Share this post Link to post Share on other sites
welshpug 1,646 Posted August 22, 2011 looks fine apart from being a bit loose Share this post Link to post Share on other sites
petert 578 Posted August 22, 2011 Looks just like a standardl Mi16 setup. Belt length is 550mm if that helps. Share this post Link to post Share on other sites
dee205 3 Posted August 22, 2011 looks fine apart from being a bit loose It's only sat loose to get an idea. I was unsure on first fitting and was going to ditch the pas altogether. 3rd gear synchro is gone so have to swap the box before I bolt the pas system all up. Cheers for replies. can get on with the fun stuff... Share this post Link to post Share on other sites
