NeilGTi85 5 Posted August 21, 2011 Afternoon, After refitting my engine, I've got a strange problem with my indicators. When I put the hazards on only the passenger side lights flash ( front, side repeater & rear). Nothing at all on the drivers side? The dash light for the drivers side indicator flashes fast like a bulb has gone. Is each side of the cars lighting loom got it's own fuse or earth? I took the plugs of the Earthing block, they looked fine but I'll fit some ring terminals see if that's the problem. Anyone got any suggestions? Share this post Link to post Share on other sites
TaffyTim 6 Posted August 21, 2011 I had an issue with the plug that connects the indicator loom. A bit of a write brushing of the terminals and some wd 40 sorted it out Share this post Link to post Share on other sites
NeilGTi85 5 Posted August 21, 2011 It was the Earthing blocks Share this post Link to post Share on other sites
