Newman Cams

[kentish_lad 0]

has anybody used them and are they any good , also been looking at an ashley exahust same question anybody got one and are they any good ?? oh almost forgot both are for an 1.9 8v

[flyfisher 6 2 Cars]

has anybody used them and are they any good , also been looking at an ashley exahust same question anybody got one and are they any good ?? oh almost forgot both are for an 1.9 8v

ive got newman fast road cams in my mi16 not bad but like any thing get what you pay for

[welshpug 1,662]

got a ph2 inlet in my gti6 engine, and I believe sandy has used some of their profiles with good results, though most of his are custom grinds done elsewhere now afaik.

[Miles 331 1 Cars]

Ashley, cheap and if the fit is like the last one I fitted, Rubbish too

[Paul_13 212 1 Cars]

Ashley, cheap and if the fit is like the last one I fitted, Rubbish too

Very loud aswell, used to own one.

[Matteo 17 1 Cars]

has anybody used them and are they any good , also been looking at an ashley exahust same question anybody got one and are they any good ?? oh almost forgot both are for an 1.9 8v

 

I have a Newman Road Cam PEUI/268/470 PH1 in my standard 1.9 not Kat. Along with a K&N induction kit (properly fitted with cold air intake) it required an adjustable fuel pressure regulator as I ran very lean without it.

[edbar 6]

Run a Ph4 in mine and it is an excellent cam, requires lots of mods and machining to run but works very well!

[Cameron 16]

I have Newman PH2 in my XU9J4RS and it works pretty nicely, idle isn't great on standard TB though..

 

I also had some problems with the pulley end not being machined flat, which vibrated my cam pulley loose! They were very helpful in fixing this though.

[Batfink 201]

Go for Cat Cams. Although not Newmans fault, their castings are of lower quality material. Just had a customer camshaft snap due to an inclusion in the casting.

I can recommend some nice profiles depending on your spec of car.

 

Kev

[petert 590]

Go for Cat Cams. Although not Newmans fault, their castings are of lower quality material. Just had a customer camshaft snap due to an inclusion in the casting.

I can recommend some nice profiles depending on your spec of car.

 

Kev

 

I think you'll find all the peugeot blanks come from one place..........

[edbar 6]

My casting Has piper cast into it, wonder where its from...............?

[Batfink 201]

I think you'll find all the peugeot blanks come from one place..........

 

not anymore

[Cameron 16]

Aren't cams forged?

[petert 590]

My casting Has piper cast into it, wonder where its from...............?

 

same place I get mine from, also with Piper cast in it - Turkey.

[Batfink 201]

most camshaft blanks come from a company called Estas.

Edited August 14, 2011 by Batfink

[petert 590]

Correct - Estas, Turkey - http://estascamshafts.trustpass.alibaba.com/