SurGie 54 Posted July 19, 2011 Whilst sorting out the GTI6/205 wiring looms i found this > Its wires go to the fan switch plug wires/battery loom and believe it could be the oil temp sensor wires etc but need this to be confirmed as i cant find the other part of this plug Cheers G Share this post Link to post Share on other sites
Anthony 1,003 Posted July 19, 2011 If it goes to the fan thermoswitch plug/loom then it's the fan test plug - link each pair of wires together and the fan will run on slow and fast speed Share this post Link to post Share on other sites
SurGie 54 Posted July 19, 2011 Cool, thanks Anthony. So i take it the green is the earth then connect the others each in turn for fast and slow. Cheers Share this post Link to post Share on other sites
Anthony 1,003 Posted July 19, 2011 IIRC it's a +12v feed rather than an earth, but otherwise yes that's how it works. Share this post Link to post Share on other sites
SurGie 54 Posted July 19, 2011 So to get this clear, the middle wire connects to the other two each in turn ? Did you Paul, i dont remember you did tbh Cheers Share this post Link to post Share on other sites
Daviewonder 533 3 Cars Posted July 19, 2011 That plug looks a bit dirty Surgie, I hope it's not fitted to your project car Share this post Link to post Share on other sites
SurGie 54 Posted July 19, 2011 You should have seen it before i gave it a quick wipe over I have a brand new looking one spare from years ago that has 5 wires and will soldier the worn out wires to it, nothing on my project will be dirty/rusty Share this post Link to post Share on other sites
SurGie 54 Posted July 20, 2011 Here is the finished plug > Im getting the hang of this soldiering now Share this post Link to post Share on other sites
