edbar 6 Posted June 7, 2011 Looking at a few sets of alloys to clear my new brakes, some are off fords. What spacer is required for them to fit? Thanks Edd Share this post Link to post Share on other sites
Strictly_Derv 34 Posted June 7, 2011 What brakes you got? Share this post Link to post Share on other sites
edbar 6 Posted June 7, 2011 285mm wilwood 4 pots. Why? im going for rims that can accept big brakes if thats your point. Share this post Link to post Share on other sites
Strictly_Derv 34 Posted June 11, 2011 That was why.... doing the same to mine, to clear the hub I bought some Ford to pug 20mm hubcentric spacers but need an extra 5mm at the front to clear the calipers due to the wheels being 6j x 13 But I believe with larger wheels its 10mm but thats if the brakes don't stick out more than standard Share this post Link to post Share on other sites
edbar 6 Posted June 12, 2011 I used a 15,, hubcentric spacer with longer bolts, no issues now although tight clearance! Share this post Link to post Share on other sites
