Rebuild Parts

[smithy 1]

going to rebuilding a 1.9 8 valve soon and was wondering if anyone has got a suggestion for places to source the gasket kits,liner seals etc?

 

or is it a case of just going to local factors?

[smithy 1]

found a local place to supply gaskets and bearings the problem i have is finding supplier for new liner seals.

 

i have looked on service box i can find the liner kit that is NFP but cannot find the seals on thier own,does anyone know where i can source some new liner seals from?

[smithy 1]

found a local place to supply gaskets and bearings the problem i have is finding supplier for new liner seals.

 

i have looked on service box i can find the liner kit that is NFP but cannot find the seals on thier own,does anyone know where i can source some new liner seals from?

 

apologies i have found the seals now and it looks like they are still supplied,for info part number is 011278 £3.15 each.

[Miles 331 1 Cars]

Thats the expensive way, just get a set of 4 for the XU7J4, around that for the set

[smithy 1]

Thanks miles will do that.

 

Excuse my lack of knowledge but what model was that engine fitted to so I can obtain part number off service box?

[Anthony 1,003]

It's in various Peugeot/Citroen models, but if you look under early 406's you'll find it (XU7JP4)

[smithy 1]

Thanks guys will have a butchers on service box.

[smithy 1]

the part number above has been superseeded by 0112a7 which is a set of 4 liner seals at a cost of about a fiver.

[Miles 331 1 Cars]

Another one of the daft parts pricing for the same item. There's lots more too

[smithy 1]

another quick question before i go to local supplier tomorrow.

 

i am going to be getting new standard size main and big end shells but just want an idea of a reasonable price before i buy them as they are sometimes quite expensive for items not "off the shelf"

[welshpug 1,657]

I think I paid about £25 for big ends from Peugeot, they were from an XU10J4R engine

 

A local supplier quoted nearer £40

 

XU10J4RS ones would have been nearer £80 IIRC!

 

I just had a look, and a set of 8 big ends for a 1.9 8 valve in standard size are £40+ vat from a main dealer, I;d be inclined to get the crank checked than order them.

 

Oversize are £74+vat.

 

 

Mains are £75+vat, thrust bearings in std size £9 a pair, two needed.

 

although if you know specifically which size mains you need, it will end up cheaper getting them all separately.

 

top are all one size at £4.79+vat, then there's 4 lower sizes dependent on clearance, price range from £3.35 to £5.13, 5 top and 5 bottom required.

Edited May 30, 2011 by welshpug

[smithy 1]

thanks wp i will get them all out first and size the crank up.

[smithy 1]

all sorted now standard size were needed.

 

could not get the prices WP found pug quoted £74 for mains and £41 for big end plus vat

 

local suppliers were £79 and £62 plus vat,local engine shop were £55 and £45 plus vat.

 

but i remembered a place we used for head repairs when i worked for vauxhall got the mains for £36 and big ends for £27 so a big thank you to halesowen engines.