Phase 1 Wiring For Turbo Conversion

[Pugs in Pieces 0]

i shall be putting a 2.0 turbo engine into the gutmann cti over the winter, i know the engine looms are different on the phase 1s, does this create many more problems with the wiring for the conversion? and is there a link to a guide of any form. (search not working)

 

thanks

[hanceformer 0]

I have a xu10 2.0 8v turbo in mine which was a pig to wire (not by me) from a 406/xantia. Honestly don't know much about the wiring but u are welcome to come and nose around it if that any help at all.

[luke1987 5]

hi having just put a 2.0 turbo in the phase 2 it was quite easy with the wiring using autodata its only a few lives and switched could send you the pics if you like luke.

[Pugs in Pieces 0]

phase 1 wiring is different to the phase 1.5 and 2. as far as i am aware it is a bt harder to do in a phase 1.