Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
STEVEBOXER

Should Elec Window Switch Illuminate?

Recommended Posts

STEVEBOXER

Hi,on my H reg 1.9 pug should the elec window switches illiuminate when side/headlamps turned on???

Share this post


Link to post
Share on other sites
cRaig

No, but as far as I know the switches out of a 405 (exectutive or something similar) should be illuminated and of the same style as the ones in the 205

 

Craig

Share this post


Link to post
Share on other sites
Pugs in Pieces

most 405 switches are illuminated have fitted them to 205s on a few occasions now. dont think any 205 came with them......

Share this post


Link to post
Share on other sites
STEVEBOXER

most 405 switches are illuminated have fitted them to 205s on a few occasions now. dont think any 205 came with them......

 

Hi,so a 405 elec switch is a straight swap is it?

Share this post


Link to post
Share on other sites
2052006

The early ones will be a straight swap I think. The later ones seemed to be a slightly different fit from what I found at the scrap yard. I got mine out of a J reg 405 and they were exactly the same. The part that illuminates is simply a bulb in a yellow holder that actually could be removed and fitted straight into my 205 switch. New bulbs can be bought from Maplin for about £1.50 if need be.

Share this post


Link to post
Share on other sites
monkee87

Have you got a comparison picture of both? I don't understand where a bulb goes on a 405 switch. Had a look in the scrappy today at 405 ones and they look identical.. :huh:

Share this post


Link to post
Share on other sites
smithy

i have a couple of 405 switches the main body is the same as a 205 but the toggle part is smaller defo no illumination.

Share this post


Link to post
Share on other sites
2052006

Have you got a comparison picture of both? I don't understand where a bulb goes on a 405 switch. Had a look in the scrappy today at 405 ones and they look identical.. :huh:

 

Take the "top" of the switch off the main bit - just unclips - you should see the yellow bulb holders inside, no doubt with blown bulbs.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×