Gearbox Swap, Mi-16 Be1 To Be3

[SteveW 6]

I,m running an MI-16 be1 gearbox at present with lift up reverse and have the chance to by a be3 box with atb diff fitted. What mods are needed to fit the be3 or is it a straight swap, looking through some threads i think the mi box has the same clutch arm as a be3.

cheers

Steve

[welshpug 1,661]

straight swap as such, fit the 205 selector arm and remove the lift up reverse cable and off you go.

 

unless its a Phase 2 Mi16 box where you'll need to fit the clutch arm+fork+bearing from the old box and remove the bracket for the mounting stud and screw the stud directly into the box.

Edited April 13, 2011 by welshpug

[SteveW 6]

straight swap as such, fit the 205 selector arm and remove the lift up reverse cable and off you go.

 

unless its a Phase 2 Mi16 box where you'll need to fit the clutch arm+fork+bearing from the old box and remove the bracket for the mounting stud and screw the stud directly into the box.

 

 

Cheers m8, not to bad then