Gearbox From A 1.8 16V 306

[Peetypug 5]

I'm currently stripping a T reg 306 XS.

I've noticed that the gearbox is very similar to my old 1.9 box, same clutch setup etc

Is it any good?

Eg ratios?

[Peetypug 5]

Anybody?

[Batfink 201]

I think when I asked about it ages ago the verdict was its pretty unexciting as gearbox ratios go. I binned mine.

[welshpug 1,666]

stick the VIN into servicebox, soon find out

[Peetypug 5]

Cheers, I will keep it to one side as an emergency backup

[pug_ham 245 3 Cars]

rip the diff housing off to see what fd ratio is stamped into the crownwheel to get a slightly better idea & it'll narrow down the possibilities on service box as well, although putting the vin in should be accurate.

 

Graham.

[welshpug 1,666]

if the box is off you'll see a code on it somewhere, the later boxes had the code engraved or stamped on unlike the sticker on the older boxes.

[Peetypug 5]

Cheers gents

All I've noticed up to now is BE4