Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
johnnyboy666

Difference Between 1.6Gti And Xs Brake Calipers

Recommended Posts

johnnyboy666

Is the only difference between the two the pad carriers? just contemplating a swap over to 1.6 hubs/brakes whilst i'm upgrading a few other things, but cant be bothered with the hassle of bleeding the brakes if i can just swap the pad carriers over instead, then swap the discs over.

Share this post


Link to post
Share on other sites
pug_ham

Yes, you can do that.

 

I did this on my old STDT which uses the GTI Bendix calipers when I won some new base model calipers on ebay.:)

 

Graham.

Share this post


Link to post
Share on other sites
Anthony

Remember that base model Bendix calipers tend to use a 5-sided bolt to attach the pad carriers, and a matching socket will likely be difficult to source locally.

Share this post


Link to post
Share on other sites
swordfish210

Remember that base model Bendix calipers tend to use a 5-sided bolt to attach the pad carriers, and a matching socket will likely be difficult to source locally.

 

Doesn't someone sell them on eBay? I did remove some 5 siders with a 2lb hammer and cold chisel once without too much trouble then just bought some 6 sided ones to replace them.

Share this post


Link to post
Share on other sites
Anthony

You can get them easily enough mail order and no doubt on eBay, but that's a fat lot of good when you're halfway through a job on a Sunday afternoon and only then realise that you need one...

Share this post


Link to post
Share on other sites
Ryan

Most motor factors normally have them I think.

Share this post


Link to post
Share on other sites
pug_ham
Remember that base model Bendix calipers tend to use a 5-sided bolt to attach the pad carriers, and a matching socket will likely be difficult to source locally.

So do the 1.6 GTI Bendix calipers but if you have an old six sided socket of a similar size you can usually get them undone using that, I did anyway.

 

IIRC I saw the correct five sided socket at halfrauds last time I was looking for stuff. :unsure:

 

Graham.

Share this post


Link to post
Share on other sites
welshpug

Draper do them, have one right here on my desk as it happens :)

Share this post


Link to post
Share on other sites
johnnyboy666

what size is needed?

Share this post


Link to post
Share on other sites
johnnyboy666

legend, ta :)

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×