pugjohn 0 Posted March 13, 2011 can anyone advise me as to the best course of action on how to deal with a little bit of rust that has started to appear in the seams just above the rear windows. thanks. Share this post Link to post Share on other sites
toddydal 1 Posted March 14, 2011 what i did with mine was dig the old sealer out the seam,rub the rust out with 40grit steping up grades to 180.treat it with krrust thats a rust treatment,etch prrime the bare metal,prime,re-seal with seamsealer then re-paint,but put masking tape or gaffer tape below and above the seam when rubbing with 40 grit so you dont srcatch f*** outa the 1/4 try and be a local to the repair as you can Share this post Link to post Share on other sites