Weld On Adapters Fuel Lines

[Andy F 0]

Hi Everyone

 

I am currently making up all my teflon lined braided hose on the car. I am nearing the fuel rail. I have 2 -6 adapters but have been looking at the tubes on the gti-6 fuel rail i am using and I'm not sure if i can weld it without blowing a hole in the tube.

 

Has anyone else done this? or have u had to braze/solder them? Any volunteers appreciated

 

Thanks

[HERMAN 33]

you could try silver solder.

[HERMAN 33]

just found these cool http://cgi.ebay.co.uk/6-AN6-STRAIGHT-Male-3-8-0-375-Tube-Adapter-/150524627860?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item230bf78b94

Neil

[Tom Fenton 1,542]

TIG welding is what is needed, I can do this for you, PM me.

[Andy F 0]

i did look at those connectors just not sure how much i trust them fitting to the existing tube as they are not the exact sizes

[HERMAN 33]

Get one of these and Tom will weld it on for you. http://cgi.ebay.co.uk/AN-8-8-AN-Male-Stainless-Steel-Weld-Fitting-/150572928697?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item230ed88eb9

Might get one myself and do my fuel tubes properly.

Neil