Cam Pulley?

[banditxs 0]

I just bought this vernier pulley off e-bay for £10 in the hope that it will fit the kent cam on my 205 xs,the pin is missing,any one have any idea or seen this before?thanks

 

[GeorgeXS 32]

If that ends up fitting its cheap! Quite different to current piper ones after a quick glance at their website.

[banditxs 0]

Yes i thought it was a bargain and no great loss if it dosnt fit,it does look similar to the 306 gti-6 pulley on the pipercam website,he did say it had the locking key missing????just a pin i hope.

[banditxs 0]

I recieved pulley today,it is the same fit 125.70mm diameter and 42 teeth but the width is not 22.15mm(tu3 pulley)and is 30.75mm which matches the 306 gti-6 pulleys,i havnt had a chance to try it on my head yet but does anyone know if this will fit?thanks.

[allye 530 3 Cars]

It will almost certainly not fit a TU3 head if its 50% wider than standard.

[banditxs 0]

Its only about 7-8mm wider than the tu3 pulley.

[Jrod 7]

Just have it machined down.

[banditxs 0]

Cheers,had it machined down 5mm on the inside,fits perfect now.