Ew10j4 Lump

[welshpug 1,661]

the 180 manifold is the same in the 206 - 307, the downpipe/cat has a specific part number for the EW10J4S in the 307 though, stud pattern is the same, same gasket.

[DRTDVL 4 1 Cars]

ok funky...

 

So i'd need to locate / purchase a 307cc 180 downpipe (only 307 i'm aware had the 180 motor in it) to fit the 180 manifold to the non-180 307 2ltr.

 

 

 

 

 

[welshpug 1,661]

there was a hatch, was called the "Feline"

[DRTDVL 4 1 Cars]

The Feline here is a trim package... found 1.6 - 2.0ltr models all non-180

[DRTDVL 4 1 Cars]

right go onto service box and had a look at this in a bit more detail and have more questions:

 

1) 307 180 (facelift vs non-facelift) exhaust downpipe / cat pipe.

 

Pre-face Lift = 1705 QZ PSA K283 / 1706 99 TR PSA K282

 

Face Lift = 1706 99 PSA K282

 

2) 206 GTI 180

1705 QE PSA K232/K264 / 1706 95 PSA K282

 

When you compare the images of the pipes does it seam the only difference is a second sensor before the cat?:

 

307:

 

 

206:

 

Edited September 6, 2011 by DRTDVL

[Josh_Quant 27]

dont know alot about the 206 180 lump

would a 206 gti 180 head fit a mi16 or gti6 block??

 

and is the inlet manifold the same fitment as mi16 and gti6??

[welshpug 1,661]

Inlet is different, exhaust looks similar one or two studs look a fair way out, don't know if the head would fit, ask Sandy, he may have an ew+xu gasket to hand to compare.

[Sandy 191]

Head fits the block, bolt holes, even the oil feed, but the oil drains are entirely different. I've got pretty close to putting an EW head on an XU a few times, but each time decided it's not worth the hassle, just use the XU or EW complete.