Oil Filler Cap And Plastic Thingy

[justinv 4 1 Cars]

Am putting all the stuff together and the filler bottle was never properly fixed to the inlet manifold as there was some kind of missing bracket. I found a bracket but from a ph1 engine which is funnily enough different from the one I have.

 

Mine is a phase 1.5 and obviously has the cylinder coil, but the inlet manifold is still a bit different anyone got a close up pic of how this could be rigged up.

 

Thanks

 

JUstin

[Henry Yorke 269 3 Cars]

I don't think they were ever properly fixed to the inlet.

[welshpug 1,666]

there should be a bobbin that screws into the side of the manifold, the filler pot is secured to this by a nut.

 

its much like an exhaust rubber or an inline fuel pump mounting, looks like these off ebay;

 

http://www.google.co.uk/products?q=exhaust...ved=0CDoQzAMwAw

[Henry Yorke 269 3 Cars]

What?! Welshpug has not come up with the part number we are missing. Are you feeling alright Mei?!

 

I've never had one of those on my cars, and always thought it strange. I'll find it and order one

[Henry Yorke 269 3 Cars]

Bobbin (Elastic bracket) - 1439 10 = £1.45

Plain washer PLAIN WASHER DIAM 6X18-2 6947 G6 = £0.30

Nut HEXAGONAL NUT 6X100-5 6936 26 = £0.40

[smithy 1]

My filler neck fits on to manifold directly without the bobbin,the cut out in bracket fits over the square block on manifold perfect and is secured with a m6 bolt and washer.

[justinv 4 1 Cars]

Hey

 

Thanks to you all, actually that what I was thinking to fit, but am looking for all the original small bits that should go with the engine. Also on the other end of the filler there is like a hook that fits where ?? anyone knows hehe

[justinv 4 1 Cars]

http://public.servicebox.peugeot.com/docpr...amp;refaff=205F 1 11C51A&idFct=FCT0512

[smithy 1]

I think the hook is for holding a pipe on a different model.

The filler neck fits on all xu petrol engines in different models.

[welshpug 1,666]

yeah, its unuused on the 8v 205, but is used I think on the 1.9 Mi16 or the 8 valve 1.9 SRI engines.

[justinv 4 1 Cars]

ok good to know that. Now I need to buy a set of speedline centre caps, can i paypal someone on here and buy them 4 me please ?

[justinv 4 1 Cars]

THanks for all the info guys, just had a look at my 92 309 and it is fixed straght to the manifold, did it that way and looks fine