Gti6 Carbs And Pas

[boldy205 75]

Hi, i am looking at putting the PAS back onto my 205. I have pretty much sussed that i need a 306gti6 high pressure pipe, when using a 306gti pump on a 306gtgi6 engine in a 205. Only question i have carbs, and wondering if anyone here has a similar set up to me and what high pressure pipe they are using?

 

Many thanks

 

Matt

[welshpug 1,655]

saxo/106 leccy pas pump is what you need, or an S16 non aircon alternator and PAS pump bracket and steel sump (ally sump may fit if modified)

Edited February 7, 2011 by welshpug

[Miles 331 1 Cars]

Bodies fit fine so I would think Carb;s should to, If not just move the pump onto the sump like I;ve done,

[Miles 331 1 Cars]

Not a 6 but a pump on the sump

[marksorrento205 80]

As miles said. I know spoox sell a pas relocation kit. Thats easier than pissing about finding s16 parts

[Miles 331 1 Cars]

Wash your mouth out, LOL. I supply them and I was the first so anyone who's done this since has copied me. This was done years ago

[marksorrento205 80]

Woops

 

I came across it last night when I was looking into bodies. I will give you a shout when the time comes

[boldy205 75]

Thanks for the replies, but Im a bit confused. So my thoughts on using a 306gti6 pump (in the std 306 position) a 306 gti6 HP metal line all on a gti6 engine, fitted to a 205gti with the 205 PAS rack wont work?

 

Thanks,

 

Matt

[dumbiron 0]

using a 306gti6 pump (in the std 306 position) a 306 gti6 HP metal line all on a gti6 engine, fitted to a 205gti with the 205 PAS?

 

Its whats on mine, don't believe in using custom bits , to hard/ expensive to replace when they break

Edited February 7, 2011 by dumbiron

[boldy205 75]

Thanks everyone! Will give me another excuse to pull the car apart!

 

Matt