205 Turbo Diesel Powersteering

[Big_Jimbob 0]

Hey guys, im just after some advice on how to adjust the tension of the power steering belt on a 205 TD?

 

Iv adjusted the brake boost belt and replaced the alternator belt but the powersteering one is slipping too...

 

Thanks

Jim

[smithy 1]

Is it ran off same belt as alternator?

 

If so then they normally just have a bracket with a m6 bolt that gets tightened to increase tension,securing bolts on alt/pas pump whichever the bracket is on are slackened slightly first.

[pug_ham 244 3 Cars]

Is it ran off same belt as alternator?

No, its run from the end of the camshat.

 

You need to loosen the two bolts clamping the pump on the gearbox bracket & then there is a 1/2" sq drive to release the tension, although it should loose most of it when you undo the pump mounting bolts.

 

Graham.