Oil Catch Cans?

[smithy 1]

just out of curiosity really but wondering how people have plumbed in catch cans?

 

with mine having PAS i struggled to find somewhere to fit the can where it would still be upright,i eventually decided to locate it where coil is and then used a bracket to fix coil to the can.

 

as for the pipework mine was in pretty poor condition so i got rid of the lot ran a new pipe from cam cover to catch can with the pipe from filler cap T'd in and then pipe from can to air intake pipe on throttle body.I have fitted an early 1.6 oil filler pipe so it does not have outlet for cam cover breather pipe and also blanked the small breather inlet on throttle body.

 

finally i put a new filler cap on that only has the large outlet and removed the wire mesh from cap and neck (think cap is meant for a diesel)