Rust :(

[Iain-gti 6]

Hi,

 

 

There is rust along the bottom edge of the windscreen, not sure how to fix it. Anyone got any ideas??

 

 

Thanks Iain

[welshpug 1,656]

remove the screen and treat the rust however suitable, be it rub down prime and paint, or cut out rot and weld in new steel.

Edited January 12, 2011 by welshpug

[Iain-gti 6]

Thought you may say remove windscreen. Trying not to remove windscreen as its a pain to refit. I hoping there would be a in genius plan.

[welshpug 1,656]

yeah, get someone else to remove the screen, its not difficult on the 205 as it is not bonded.

[Iain-gti 6]

Like who?? company?

[omega 82]

do it yourself its easy.

[Stevo309 0]

Hit it with a hammer, fix the rust then call your insurance company and get them to come and install a new one

[Iain-gti 6]

I can remove it, doing it Rambo style . But refitting is the tricky bit.

[Masekwm 2]

String

[mickie 3]

its harder to remove than refit.. honestly its soo easy to fit a 205 windscreen

[pugpete1108 62 1 Cars]

agreed, its far easier to refit than remove. i shmashed mine trying to remove it. good job it was cracked already hence why it was being removed

[Jrod 7]

Fold the rubber back and jam 2ps in between the seal and the actual frame, do this all the way along the top until you can get a corner out then it just slides out.

 

Easy!

[SurGie 54]

Fold the rubber back and jam 2ps in between the seal and the actual frame, do this all the way along the top until you can get a corner out then it just slides out.

 

Easy!

 

 

Do you mean put the 2p's from inside the car ?

[Jrod 7]

Yes, If you try it and have a bit of common sense you'll figure out exactly what I mean.

Edited January 13, 2011 by Jrod

[harryskid 193]

If your well off, try 50ps

[MerlinGTI 3]

Yes, If you try it and have a bit of common sense you'll figure out exactly what I mean.

 

 

If your well off, try 50ps

 

I love this forum

 

the 2p idea is mint too