Broken Pulley Helppp

[luke1987 5]

Hi all need some good advice i was trying to remove the crank pulley from xu9 8v uning a 3 legged puller and a bit of heat only problem is the pulley broke in 3 places and the centre is still on anyone any ideas how to get it off ive soaked it in wd40 and used a blowtorch on it with a crowbar but it just doesnt wnt to move and dont fancy keep prying it and damaging the block any ideas would be great thanks.

[omega 82]

cut it with a angle grinder[carefully]

[pug_ham 244 3 Cars]

Soak with Plusgas or wd40 & shock it with a hammer to loosen it.

 

You have removed the pulley bolt yeah?

 

Graham.

[Daviewonder 533 3 Cars]

Hammer and chisel should do the trick.