Mi16 Conversion Help

[ashwarrior205 0]

Hello happy new year every1. just few questions about coverting my 1990 205 1.9 to mi16 i got a d6c engine and loom and ecu but no crankshaft sensor or afm. my first problem is identifying which bosch motronic ecu it is its a 2 row with 35 pins on ecu and loom plug got 22 pins numbered 1,2,3,4,5,6,7,10,12,13,14,15,16,17,18,19,21,24,29,31,32,34. second do i need a crankshaft sensor and wat mass air flow meter part numbers wrk with mi16 and this ecu. and if any 1 got any other recommendations on dos and donts with conversion b appreciated

[dino20vt 3]

The same AFM was used throughout 1.9 Mi16 production for 2 or 3 row, I think it was also used on the late 1.9 8v 122 bhp cat engine too, i know the part number ends in 202, I've got about three in the garage, I'm just not at home at the minute to check.

 

You'll need the crankshaft sensor.

[ashwarrior205 0]

thank you very much for the info how much would u want for one of the afm's plz

Edited December 31, 2010 by ashwarrior205

[dino20vt 3]

I'm away at the minute so once I get back I'll dig them out and get back to you.