Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
mogsman

Which Cv Boot Cone?

Recommended Posts

mogsman

Hi all, the car passed its MoT earlier and had an advisory to replace one of the outboard cv boots. I went to my local motorfactors for a cone and they had a green flimsy plastic cone for £15. I didn't buy it as the bloke behind the counter said it wouldn't last, so are there any that can be recommended and are quite robust?

Ian

Share this post


Link to post
Share on other sites
welshpug

I never bother with cones, just knock the joint off if its a 1.9, or remove the inboard joint if its a 1.6.

Share this post


Link to post
Share on other sites
mogsman

Its a 1.6 and too scared to remove the in board joint for loosing bearings, oil or whatever else might fall out. Never done this before so I thought the cone would be the easiest option.

Ian

Share this post


Link to post
Share on other sites
Ryan

The plastic ones work well enough for the occasional job. Unless you plan on changing boots on a daily basis then it's not worth spending loads on anything better.

 

I got one off ebay for a fiver, used it twice and it's been fine.

Share this post


Link to post
Share on other sites
Jrod

I cut the top off a roadside cone. :)

Share this post


Link to post
Share on other sites
Miles

If its only a small split just use some Superglue to stick it back together, will outlast the rest of the boot

Share this post


Link to post
Share on other sites
pug_ham

If you have use of a cone I've fitted the AMK stretchy boot kits on both 1.6 & 1.9 driveshafts with good results (no leaks & lasting 2 years +) & my car is mostly used on track.

 

I have one of the "flimsy green" cones & it's worked fine various times as long as you lube it well so th boot slides over it easily.

 

I've had it a few years & it cost less than £10 iirc.

 

Graham.

Share this post


Link to post
Share on other sites
Masekwm

How do you know if a boot is a stretch boot? I have a shaftec boot but don't have a clue how to fit it :lol:

Share this post


Link to post
Share on other sites
Ryan

I think most aftermarket boots are usually the stretch kind.

 

Fitting is dead easy:

 

Share this post


Link to post
Share on other sites
Tom Fenton

You can get stretch and non stretch boots, you will soon know as the non stretch will not stretch!!

 

I have an air operated tool that makes it a doddle of a job, perfect for doing run of the mill hatchbacks for people in double quick time. I tend to use non stretch boots on my own cars though I have to say.

Share this post


Link to post
Share on other sites
Alastairh
I cut the top off a roadside cone. :)

 

:lol: Genius!

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×