Instant Gasket

[Iain-gti 6]

Hi,

 

 

anyone recommend an instant gasket, I have used a black one before which is good but can remember the name of it.

 

 

Thanks Iain

[welshpug 1,657]

I'd recommend Wurth's RTV

[Paul Smith 0]

Loctite is black and the best I've used

[Iain-gti 6]

RTV thats the one!!!!!!!

 

 

cheers welshpug

[daza4 24]

I'd recommend Wurth's RTV

 

 

If you want any im a wurth rep

 

likewise for any wurth products I can supply them !!

 

PM me

 

Daza

[Tom Fenton 1,541]

How much can you supply the 3L fluid brake cleaner for?

[daza4 24]

If you have 4 they are £5.99 each. + P&P

[Tom Fenton 1,541]

I'm assuming you mean the aerosols? I mean the 3 LITRE bulk brake cleaner to go in the Wurth refillable pump spray bottle.

 

Although if it is £5.99 each for the 3 Litre then I'll have 10 please!!!!!!!!!

[daza4 24]

No Tom i mean the 3ltr containers, if u buy 4 or more i can do them for 5.99 each, so 4x 5.99 +vat plus p&p

 

send me a pm if u want some

 

Daza

[JRL 14 1 Cars]

hope you dont mind me hijacking but on the subject of gasket sealant will this stuff be suitable for a standard mi16 throttle body gasket? or do peugeot still do the correct gasket?

[joe1joe 3]

with my experiance i have used many diffrent sealers, the silicone peugeot sale is pretty good.

 

but i now just use normal motor fators rtv in a chauk type gun and its cheap!

 

and i havnt had any leaks with the cheap stuff, think its usualy down to the prep.

[ORB 227 1 Cars]

I like Tiger Seal.

[S@m 156]

hope you dont mind me hijacking but on the subject of gasket sealant will this stuff be suitable for a standard mi16 throttle body gasket? or do peugeot still do the correct gasket?

 

Peugeot don't do the throttle body gasket anymore, assuming you mean the 1.9 mi16. I cannot comment on using instant gasket, the only alternative i have found is the ptfe gaskets on ebay (but i haven't tried one).

 

Sam

[welshpug 1,657]

with my experiance i have used many diffrent sealers, the silicone peugeot sale is pretty good.

 

but i now just use normal motor fators rtv in a chauk type gun and its cheap!

 

and i havnt had any leaks with the cheap stuff, think its usualy down to the prep.

 

that's normally black Loctite with their cut added

[Alan_M 66 1 Cars]

Peugeot don't do the throttle body gasket anymore, assuming you mean the 1.9 mi16. I cannot comment on using instant gasket, the only alternative i have found is the ptfe gaskets on ebay (but i haven't tried one).

 

Sam

 

I managed to get one from Pug Wokingham, no problems.

[Redtop 14 2 Cars]

that's normally black Loctite with their cut added

 

Yeah just has a pug part number on it Mei. Not bad stuff. The sealer I use on all my cars is a Toyota one. It's in a small tube and is £73 inc vat!! It never fails and when your doing timing chain covers the last thing you want is for the thing to leak after you've had the engine out! Most of wurths stuff is very good just abit harder to get over here. Is there actual Wurth shops in England or just reps?

[welshpug 1,657]

quite rare to see any in the shops, usually found from reps (daza4 happens to be one as mentioned earlier ) or on ebay!

 

 

much like snapon and mac in that respect.

Edited December 12, 2010 by welshpug

[Redtop 14 2 Cars]

It's a rep that come round to us the odd time. Thought maybe there was shops in the mainland as there is an actual 'Wurth shop' that ive been in, in Portugal.

[Tom Fenton 1,541]

There are actually a number of Wurth shops around, about half a dozen in the UK. My local factor also does carry a few selected Wurth products, including the black silicone, which is where I buy mine from.

[All Praise The GTI 3]

we use wynns black gasket maker at work. comes in a pressurised can withstands constant 260c i think

[S@m 156]

I managed to get one from Pug Wokingham, no problems.

 

I work for citroen and they are definetly NFP, part number 163565. I suppose pug in wokingham must've had one in stock! lucky find!!

 

 

Sam