Forgot Location Of Hoses, Vacuume Pipe Etc...

[Flozman 4]

Bit ashamed to ask, but i have looked in the Haynes, the pugeout service box, searched the forum.

 

But im having problems with the plumbing, I took the car apart forever ago and as its my first 205 I havent really mentally made a note of were things go. Does anyone have any detailed photo's of the thottle body, manifold, breather pipes and vacuume hoses. Once I get a few plugged it should come back to me.

 

I'm so close to getting it running and its to cold to be messing about for ages.

[Anthony 1,003]

• Brake servo vacuum goes to the passenger side of the inlet manifold
  
• Dizzy vacuum advance goes to the underside of the throttle body.
  
• Oil filler cap breathers go to the top of the throttle body (smaller one) and inlet hose between throttle and AFM (larger one)
  
• Cam cover breather goes down to the oil filler hose at the bottom of the block
  

Hopefully that should fill in most of the blanks for you

[Flozman 4]

Thanks Mate, very helpful. Its like mixing salad atm and im just going round in circles.

 

Also im sure you'll know, whats going on with my alternator? I have the one the cable coming from the starter motor. Were can i find the other one?

 

Thanks again

[Anthony 1,003]

There's two alternator connections - thick cable from the battery (via the starter), and a thin (usually brown) wire with a spade connector on it

[Flozman 4]

There's two alternator connections - thick cable from the battery (via the starter), and a thin (usually brown) wire with a spade connector on it

 

legend.